|
These muffler deletes will bolt directly to your OEM Y-pipe to replace your factory heavy mufflers. Remark has fabricated this exhaust system from 2.5" 16-gauge T304 stainless steel materials that feature smooth mandrel bends that will help reduce back-pressure. Other features include 4" quad double-wall exhaust tips, along with new hardware and gaskets to make this muffler delete ready for ... |
These muffler deletes will bolt directly to your OEM Y-pipe to replace your factory heavy mufflers. Remark has fabricated this exhaust system from 2.5" 16-gauge T304 stainless steel materials that feature smooth mandrel bends that will help reduce back-pressure. Other features include 4" quad Single-wall exhaust tips, along with new hardware and gaskets to make this muffler delete ready for ... |
Rear Section exhaust with coated stainless steel piping Fits: 2004-2008 Scion Tc Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM ... |
HKS have designed the High Power Exhaust for specific vehicle models to optimize the straightest flow pipe according to vehicle. Optimized piping for each vehicle model to ensure the straightest flowing piping possible. Enjoy the full sound of the engine with increased piping diameter, up to 3.5 inches. Very competitive pricing due to the use of SUH409 piping. Features: Construction: SUS304 ... |
Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating ... |
Can't decide on an exhaust system yet? The Remark Axleback offers a quick, clean and cost effective solution to REV up your Nissan 370z today. PRODUCT FEATURES : Direct bolt-on easy installation to the OEM system (Please note : this product will NOT fit aftermarket exhaust system) 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe Slant style tips Factory OEM style exhaust ... |
Can't decide on an exhaust system yet? The Remark Axleback offers a quick, clean and cost effective solution to REV up your Nissan 370z today. PRODUCT FEATURES : Direct bolt-on easy installation to the OEM system (Please note : this product will NOT fit aftermarket exhaust system) 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe Slant style tips Factory OEM style exhaust hanger ... |
Can't decide on an exhaust system yet? The Remark Axleback offers a quick, clean and cost effective solution to REV up your Nissan 370z today. PRODUCT FEATURES : Direct bolt-on easy installation to the OEM system (Please note : this product will NOT fit aftermarket exhaust system) 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe Slant style tips Factory OEM style exhaust hanger ... |
PRODUCT FEATURES : Direct bolt-on easy installation to the OEM system (Please note : this product will NOT fit aftermarket exhaust system) 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe Slant style tips Factory OEM style exhaust hanger rod construction High quality hand welding Gaskets and bolts are included Optimal weight reduction from the factory mufflers 4.5inch dual tips, a ... |
HKS Sport Exhaust System Sport Exhaust Systems are designed to reduce back pressure and increase exhaust flow for greater peak power and a broader torque band. Each Sport Exhaust application utilizes a specific muffler design and shape along with the appropriate piping diameter to maintain low-end torque while maximizing high-end horsepower. Features: Single SUS304 muffler & dual ... |
|
|
|
For your 2007 - 2013 BMW 335i, 335xi and 335is with the N54 & N55 Engine We are proud to introduce our VRSF Stainless Steel Race Muffler Delete for the E90/E91/E92/E93 BMW 335i/xi/is. This muffler delete is one of the most cost effective exhaust modifications available for your N54 & N55! By eliminating the incredibly restrictive OEM muffler, back pressure is reduced significantly ... |
The Comp RS Exhaust System line from MXP introduces a more aggressive sounding system at a lower price and here you're looking at the MXP Comp RS Muffler Delete. With factory mufflers being as heavy as they are, and the MXP units are direct replacements for the mufflers and will fit up to the OEM midpipe where it meets at the Y. FEATURES Stainless steel construction Polished quad tips Provides ... |
Save weight and improve the sound in your vehicle with the Nameless Performance Axleback Exhaust with a 5" muffler. This is a direct fitment to the factory mid pipe, and it is a direct replacement of the heavy and restrictive factory issued baffled mufflers. This muffler delete has been fabricated from TIG welded 304 stainless steel with a polished stainless steel tip. Once installed, you will ... |
Save weight and improve the sound in your vehicle with the Nameless Performance Axleback Exhaust Muffler Delete. This is a direct fitment to the factory mid pipe, and it is a direct replacement of the heavy and restrictive factory issued baffled mufflers. This muffler delete has been fabricated from TIG welded 304 stainless steel with a polished stainless steel tip. Once installed, you will have ... |
Flowmaster's new line of FlowFX Cat-back exhaust systems. This system is perfect for the person looking for an aggressive exterior and interior sound level with all of the performance benefits that you would expect from Flowmaster. New features include, bright 409S stainless steel tubing, a pair of Flowmaster's new FlowFX straight-through mufflers with a large 3.00 inch core for maximum ... |
The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust ... |
The MagnaFlow Competition Series Exhaust Systems are designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention. These systems may not comply with all local or federal noise requirements. * All Mandrel Bent Tubing * 409 Stainless Steel Construction * Increased Horsepower and Torque * Lifetime Construction Warranty ... |
Flowmaster's American Thunder Axle-back exhaust system for the 2015-2017 Ford Mustang is perfect for the person looking for a moderately aggressive sound level outside of the car, while maintaining a mild sound level inside, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear) emissions-legal system for cars with the 2.3L EcoBoost or ... |
The Super Megaphone Exhaust System was the original single tip muffler in Japan. It popularized the single tip design and set quality standards for performance exhausts. The canister and tip of the Super Megaphone is constructed from SUS 304 polished stainless steel. The tip measures 115mm in diameter and is stamped with its unique logo. This muffler is sure to become a “classic” in the world of ... |
ISR Performance Race Muffler Delete - ND Miata (16+) ISR Performance Race Muffler Delete removes the rear muffler and is a quick and clean solution to losing weight, and giving your ND that extra edge at the track. This has not been tested on the ND Club models and may interfere with the bumper cover. Specs 2.75in stainless steel piping that flares to a 3in tip Gasket ... |
ISR Performance Race Muffler Delete - NC Miata (06-13) ISR Performance Race Muffler Delete removes the rear muffler and is a quick and clean solution to losing weight, and giving your NC that extra edge at the track. ISR Performance Race Muffler Delete drops roughly 21lb's compared to the stock muffler This unit will not work in conjunction with the Circuit Spec mid pipe. ... |
|
|
|
|
The choice of an aftermarket axle-back exhaust is complicated. There are lots of choices. CORSA Performance Axle-Back Exhausts focuses on delivering the best of what you want to enhance your driving experience. *Aggressive Performance Sound* Our systems are all acoustically styled and engineered to match the make, model, and harmonics specific to your vehicle. Each system is designed to match ... |
The choice of an aftermarket axle-back exhaust is complicated. There are lots of choices. CORSA Performance Axle-Back Exhausts focuses on delivering the best of what you want to enhance your driving experience. *Aggressive Performance Sound* Our systems are all acoustically styled and engineered to match the make, model, and harmonics specific to your vehicle. Each system is designed to match ... |
|
|
|
|
|
|
|
BORLA Type-S / Type-S II Cat-Back & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and a distinctive more aggressive sounding "S-Type" sound - respected by motoring enthusiasts everywhere. From the design characteristics of the inner cores to the ... |
Features:-In house testing produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno-Constructed from 2-1/2" 100% TIG-welded mandrel-bent, brushed finish, 304 stainless steel tubing -Incorporates dual high-flow, polished 304 SS mufflers-Utilizes a OE-style flange for a leak-free seal-Includes dual, Takeda laser-etched, double wall, angle-cut 304 stainless ... |
|
|
Cat-back sport exhaust ... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(60mm Piping w/Dual 120mm Tip) Built for the (98-02) Lexus GS300... Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due ... |
|
A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while ... |
|
Can't decide on an exhaust system yet? The Remark muffler delete is a great choice for those wanting to hear the boxer rumble at a fraction of the cost of a full cat-back exhaust system setup. This rear section muffler delete is designed to work as a direct bolt on in conjunction with the OEM midpipe. This system utilizes strong 2.5" 16 gauge T304 stainless steel and mandrel bent piping for ... |
Can't decide on an exhaust system yet? The Remark muffler delete is a great choice for those wanting to hear the boxer rumble at a fraction of the cost of a full cat-back exhaust system setup. This rear section muffler delete is designed to work as a direct bolt on in conjunction with the OEM midpipe. This system utilizes strong 2.5" 16 gauge T304 stainless steel and mandrel bent piping for ... |
Can't decide on an exhaust system yet? The Remark muffler delete is a great choice for those wanting to hear the boxer rumble at a fraction of the cost of a full cat-back exhaust system setup. This rear section muffler delete is designed to work as a direct bolt on in conjunction with the OEM midpipe. This system utilizes strong 2.5" 16 gauge T304 stainless steel and mandrel bent piping for ... |
|
|
|
|
|
Private label MFG Track-pipes are made of 304 TIG welded stainless steel and weighs at a remarkable 13 lbs. Compared to the stock brick of a muffler that weighs 26 pounds and you save 13 pounds. The piping of this Track-pipe is an OD (OUT DIAMETER) of 2.5/65mm Dual Exit for the most direct exhaust path Quick 15 minute install using only hand tools Ultra light weight of 3lbs Comes with polished ... |
A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while ... |
|
|
|
|
The Invidia Q300 Exhaust features a flat bottom shaped muffler design results in improved high speed aerodynamic performance. The muffler inside contains continuous piping design and use of Advantex material that results in an excellent free-flow exhaust with optimized back pressure, giving greater horsepower, torque gains and a rich deep sporty sound. The use of SUS304 polished stainless ... |
|
|
|
|
Designed for the VA Chassis (2015-2018) Subaru WRX and STi Sedans, the Nameless Performance AxleBack Exhaust is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb restrictive baffled mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes and configurable tailpipe tip style, this system is easily configurable to your desired look and ... |
|
|