Applications: All K-series engines Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle.  The K-Tuned T-stat plug and bracket allows you to remove the oem heater hose pipe and properly block off the opening that is left behind.  The o-ring s

Applications: All K Series Motors Our K-Tuned Magnetic Oil Drain Plug will help keep unwanted engine shavings from floating around in your oil creating damage. The Drain plug is very easy to install and maintain just remove your OEM drain plug and install our K-Tuned one and when changing your oil

Applications: 88-01 B-Series engines 88-00 D-Series engines (Except D16Z6). Note: * Does NOT fit D16Z6 * Redesigned to work with ALL B-series transmissions * May Not fit with some scattershields * Comes with both 16AN and Hose End Fitting The K-Tuned B/D Thermostat Housing was developed to ...

Application: Only fits K-Tuned K-Series fuel rail. Note: * Does NOT fit with KUW-20T-XXX upper coolant housings * You may have to file down the OEM Phenolic spacers to ensure the injectors are properly secured between the rail and the intake manifold. * Please check clearance with upper coolant ...

Applications: K-series cylinder heads Note: * Cylinder heads with heater hose fitting besides the header * The tread on the head is M20x1.0 Some of you may be interested in deleting the heater hoses and heater core from your K-swapped vehicle.  The K-Tuned Heater outlet plug is made from

Applications:  All K-series engines Universal (fits any 1.25" rad hose) Note: * Replacement thermostat Stant Part # 13958 (180 Degree) This part is most often used in conjunction with our K-Tuned Water Pump Block Off Plate kit.  Installation of the Water Plate kit deletes the fact

Application: K-Series intake manifolds Note: * Hardware included K-Tuned MAP port plug is a simple and clean design to eliminate extra unused MAP ports found on K-series intake manifolds. When making changes to your intake manifold or throttle body you will often have more than one MAP port. K-

Applications: K-Tuned Swivel Neck T-stat  If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port.

Applications: 92-95 Civic EG  (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator 96-00 Civic EK  (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator 94-01 Integra DC2 (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator K-Tuned has added yet another ...

Applications: 88-91 Civic EF 92-95 Civic EG 96-00 Civic EK 90-93 Integra DA 94-01 Integra DC 92-96 Prelude BA 07-01 Prelude BB 00-04 S2000 AP1 94-97 Accord CD 98-02 Accord CG Note: * Requires an engine management (Flashpro/Kpro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors ...

Applications:  12-15 Civic Si  13+ ILX  09-10 TSX CU  06-11 Civic (R18 Motor)  06-09 S2000 AP2 11-13 CR-Z Note: * Requires an engine management (Flashpro/Kpro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors K-Tuned 4 BAR MAP Sensors are designed to ...

Applications: All K-Series engines Fits K-Tuned Throttle Bodies Note: * Excludes K24Z-Series Engines * Requires engine management to use (Flashpro/K-Pro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors * We offer a 1 year warranty with all MAP Sensors. K-Tuned 4 BAR MAP Sensors ...

Applications: K Swapped cars Note: * Requires K20 thermostat housing or K-Tuned Swivel Thermostat KST-UNV-350 (Thermostat must be pointing down) * You can include bolt-on radiator brackets to make things even easier * Any fitment question please contact us K-Tuned has made some improvements to

Applications: K Swapped cars Note: * Requires K20 thermostat housing or K-Tuned Swivel Thermostat KST-UNV-350 (Thermostat must be pointing down) * You can include bolt-on radiator brackets to make things even easier * Any fitment question please contact us K-Tuned has made some improvements to

Applications: K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap)   **For instructions click here** Note: We have 6 different harnesses available. Different routing, power wire options, and wire/loom. *Race-Grade Version - Uses Raychem DR-25 loom and ...

Applications: K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap)   **For instructions click here** Note: We have 6 different harnesses available. Different routing, power wire options, and wire/loom. *Race-Grade Version - Uses Raychem DR-25 loom and ...

Applications: K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap)   **For instructions click here** Note: We have 6 different harnesses available. Different routing, power wire options, and wire/loom. *Race-Grade Version - Uses Raychem DR-25 loom and ...

Applications: K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap)   **For instructions click here** Note: We have 6 different harnesses available. Different routing, power wire options, and wire/loom. *Race-Grade Version - Uses Raychem DR-25 loom and ...

Applications: 92-95 Civic EG with EKK2 Mounts 96-00 Civic EK with EKK2 Mounts 94-00 Integra DC2 with EKK2 Mountsw OEM or aftermarket RSX/EP3 Radiator OEM K24/K20Z3 style Side mounted upper coolant neck. Note: * Requires K20 thermostat housing or K-Tuned Swivel Thermostat KST-UNV-350 (Thermostat

Applications: 92-95 Civic EG  (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator 96-00 Civic EK  (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator 94-01 Integra DC2 (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator K-Tuned has added yet another ...

Applications: ZDX Throttle Body on RBC bolt pattern manifolds 2006-2015 Civic Si 04+ TSX CL Note: ZDX Throttle Body Part Number - 16400-RYE-A11 The Honda ZDX throttle body is a great upgrade for DBW (Drive By Wire) cars looking to increase airflow. It offers OEM reliability at an affordable ...

Applications: 06-15 Civic Si 06-09 S2000 13-15 ILX 09-14 TSX Our 72mm Drive By Wire Throttle Body is direct bolt on to RBC/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of ...

Applications: All K-Series engines with Auto Tensioner New Design Easy to find replacement pulley Note: * Does NOT fit K24Z3 * Race Proven for over 1000 WHP The K-Tuned Adjustable EP3 Pulley kit is the newest addition to our ever growing parts line-up.  This simple and very useful ...

The K-Tuned All-In-One Adjustable VSS Converter was designed to merge all of our original VSS units into one simple and easy to use programmable speed correction unit. By connecting the unit via USB to any Windows based computer and using a simple downloaded computer application you can select ...

Applications: Honda K24Z Series engines Note: Includes 12-15 9th Gen Civic SI INSTALLATION TIP: When removing the factory coil cover you can use a set of vice grips holding a 10mm socket. This will allow you to leave the cowl cover in place. Since releasing our original K-Tuned Coil Pack ...

K-Tuned Coolant Recirculation Hose ...

Applications: 92-95 Civic EG 94-01 Integra DC2 We stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to ...

Applications: Type A fits the following Most aftermarket radiators including K-Tuned Passenger Radiator 88-91 Civic / CRX 90-93 Integra Type B fits the following K-Tuned Upper Coolant Housing Filler Necks 94-01 Integra 02-06 RSX 04-08 TSX 90-97 Accord 92-18 Civic 93-97 del Sol 03-08 Honda ...

Applications: All K-series engines  The K-Tuned Idle Air Assist Delete Kit will help clean up the overall look of any K-series engine by removing the ugly and unnecessary Idle Air Assist valve from the engine.  This valve is typically mounted on the rad inlet or intake manifold ...

Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Note: * When switching to a steel oil pan you can purchase a flywheel cover ...

Applications: AP1 and AP2 Cluster Swaps into EF, EG, EK, DC2 Note: *May work with other chassis but inputs have not been tested. The K-Tuned All-In-One S2000 Dash Converter was designed to take the all the guesswork and headaches out of the very popular S2000 cluster swap. This simple, easy ...

Application: Universal with 3.5" piping Dimensions: 5.25" overall height 6" filter diameter 4.75 " top base   The K-Tuned Air filter is a Dry Filter. ...

Application: Universal with 3.5" piping Dimensions: 5.25" overall height 6" filter diameter 4.75 " top base   The K-Tuned Air filter is a Dry Filter. ...

Applications: All K20 and K24 Note: *Does NOT fit K24Z motors K-Tuned Tensioner Cover Plate This product is designed with a simple o-ring seal that is set into a machined groove on the back of the cover. This o-ring seal design makes timing chain tensioner checks and changes much faster and ...

Applications: All K-Series engines Note: * This is for built motors with large cams. Not to be used on stock motors. * Required to use a new chain with install, you want to avoid reusing an old stretched chain. * Does NOT fit K24Z-Series The K-Tuned Timing Chain Tensioner was designed in ...

Applications: K20Z3 K24 heads Note: * Will NOT work with K24Z and K24Y Series Engines * Will NOT work with K24A1 * May Have fitment issues with turbos depending on size of turbo and manifold * Rad cap is not included * There is fitment issues with the K20 Upper Coolant Housing and Jackson ...

Application: Add-on The K-Tuned V-Stack combo features a Dry Filter that can be washed and re-oiled. The combo includes: V-Stack (3" or 3.5") V-Stack Filter, Silicone Coupler, and Clamps. ...

Applications: K-Tuned radiators Universal (fits most aftermarket radiators) Note: * Kit includes mounting hardware This High efficiency 750 CFM 12' slim design radiator fan can be wired as either a push or pull type.  It can also be mounted on any OEM or aftermarket 92-00 Civic radiator. ...

Note: * Runs K-Series MAP, IACV, and TPS. B-Series TPS Adapter is available to use B-Series TPS. * No sensors included The K-Tuned 80mm K-Series Throttle Body features the largest bore of any aftermarket K-Series throttle body on the market. By using a specialized set of billet adapters we have ...

Applications: 96-98 Civic EK 99-00 Civic EK Note: *All Australia EK use 1996-98 harnesses. **For 96-98 instructions click here** **For 99-00 instructions click here** We stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to ...

Applications: All K-Series engines with Auto Tensioner New Design Easy to find replacement pulley Note: * Does NOT fit K24Z3 * Race Proven for over 1000 WHP The K-Tuned Adjustable EP3 Pulley kit is the newest addition to our ever growing parts line-up.  This simple and very useful ...

Applications: K20 and K24 Valve Covers Note: * There may be fitments with issues with some baffled oil pans We've redesigned the dip stick. It now has an injector molded bottom level marker to allow easier reading of oil level. We have also provided o-rings and grooves which can be used to ...

Applications: All K-series engines Note: *Our billet filter comes with a free removal tool to dis-assemble the housing and remove the filter for cleaning. The idea of re-usable oil filter has been used in many forms of racing for several years now, but surprisingly, there were limited options ...

Applications: K-Tuned Fuel Rails Note: *May work with other fuels rails K-Tuned has designed a one piece fitting that uses the existing center port on our rail to properly mount the fuel gauge in the center of our rail just below the K-Tuned logo.  The resulting look is very clean, compact ...

Applications: K-Tuned Fuel Rails Note: * Gauge sold separately This fitting is designed to be used with K-Tuned K-Series Fuel Rails. It has a 1/8 NPT port designed to fit our gauge and -6AN Port for feed or return fuel line. This is great for someone looking for a clean look. The fuel line is ...

88-91 Civic EF 88-91 CRX We stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements ...

Application: 01-05 Civic EM2 **For instructions click here** We stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt ...

The goal with any performance header design, is to get exhaust gases to flow out of the engine faster and more efficiently, which in turn will produce more power and performance. The K-Tuned RSX Header was designed with this exact theory in mind and utilizes a proven 4-2-1 Tri-Y design with ...

Applications: Type A fits the following Most aftermarket radiators including K-Tuned Passenger Radiator 88-91 Civic / CRX 90-93 Integra Type B fits the following K-Tuned Upper Coolant Housing Filler Necks 94-01 Integra 02-06 RSX 04-08 TSX 90-97 Accord 92-18 Civic 93-97 del Sol 03-08 Honda ...