|
|
|
|
|
|
|
AVAILABLE FOR PRE-ORDER Shipping early February 2024 Fits all 2023+ Honda Civic Type-R FL5 Fits all variant models including RHD, International Models, Etc. Important Notes: NO ECU CALIBRATION REQUIRED COMPATIBLE WITH ALL FACTORY FITMENT INTERCOOLERS - PRL MOTORSPORTS INTERCOOLER UPGRADE RECOMMENDED FOR OPTIMAL FITMENT & RESULTS Technical Notes: Our charge pipe ... |
The ETS EVO X intercooler piping kit is next in line and is a very cool modular package. The upper intercooler piping starts with a smooth mandrel bent 2.5" stock turbo outlet pipe which connects to the remainder of the hot side piping. The stock turbo outlet pipe is separate to allow it to be swapped out with the installation of our EVO X turbo kit to come so that the remainder of the upper ... |
|
|
|
The all new ETS Titanium Series upper intercooler pipe. This pipe is designed for maximum durability and performance by eliminating many of the unnecessary bends in the stock piping that snake around the stock engine bay. The upper intercooler piping starts with a smooth mandrel bent 2.5" stock turbo outlet pipe which connects to the remainder of the hot side piping. The stock turbo outlet ... |
|
|
ETS 2022+ Subaru WRX Titanium Front Mount Intercooler Piping Kit Only The ETS intercooler piping kit uses 2.5" OD Titanium tubing. The piping is cut and welded with precision pie cuts. The ends of the pipes are beaded so you won't have to worry about couplers coming off during a pull. Pipes can either be brushed or anodized. We guarantee the best possible fitment which will save you precious ... |
Ditch the dainty OEM plastic charge pipe for the all new ETS Stainless Steel Charge Pipe for the 2022+ Subaru WRX! The OEM Charge Pipe is reduced all the way down to 1.56" at the turbo flange, some of our competitors increase this to 2.25", but ours is made from a true 2.5" diameter pipe from the outlet of the turbocharger to the 2.38" machined inlet flange of the TMIC. This provides a nearly ... |
Ditch the dainty OEM plastic charge pipe for the all new ETS Stainless Steel Charge Pipe for the 2022+ Subaru WRX! The OEM Charge Pipe is reduced all the way down to 1.56" at the turbo flange, some of our competitors increase this to 2.25", but ours is made from a true 2.5" diameter pipe from the outlet of the turbocharger to the 2.38" machined inlet flange of the TMIC. This provides a nearly ... |
Black/Red ETA End Of Aug To Early Sept Neon Yellow/Hyper Pink 1-2 Weeks Improve the air flow in your vehicle with the PERRIN Charge Pipe. The OEM charge pipe for your application is restrictive and the design narrows down in certain areas which creates uneven airflow. The PERRIN design combines smooth bends with a smooth interior with a larger piping diameter that creates better ... |
PLM Intercooler Charge Pipe Kit 2023+ Integra 2022+ Civic 1.5T Larger diameter charge pipe, increase air flow, better cooling, ... |
Replace your old and worn factory rubber radiator hoses with ISR Performance silicone radiator hoses. Upgrade your cooling system to the strength of a two layer silicone hose. These hoses are designed to take a higher range of heat and coolant pressures than OEM style hoses Not only will these hoses enhance your cooling by resisting heat they also add a nice clean touch to your engine bay. ... |
ISR Has now released a line of Silicone-based coolant hoses that are designed to take a higher range of heat and coolant pressures than OEM style hoses. Silicone has a much higher strength than the OEM rubber hoses which will prevent the hoses from expanding. ** ** Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; ... |
Replace your old and worn factory rubber radiator hoses with ISR Performance silicone radiator hoses. Upgrade your cooling system to the strength of a two layer silicone hose. These hoses are designed to take a higher range of heat and coolant pressures than OEM style hoses Not only will these hoses enhance your cooling by resisting heat they also add a nice clean touch to your engine bay. ... |
ISR Has now released a line of Silicone-based coolant hoses that are designed to take a higher range of heat and coolant pressures than OEM style hoses. Silicone has a much higher strength than the OEM rubber hoses which will prevent the hoses from expanding. ** ** Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; ... |
ISR Has now released a line of Silicone-based coolant hoses that are designed to take a higher range of heat and coolant pressures than OEM style hoses. Silicone has a much higher strength than the OEM rubber hoses which will prevent the hoses from expanding. ** ** Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; ... |
ISR Has now released a line of Silicone-based coolant hoses that are designed to take a higher range of heat and coolant pressures than OEM style hoses. Silicone has a much higher strength than the OEM rubber hoses which will prevent the hoses from expanding. ** ** Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; ... |
ISR Has now released a line of Silicone-based coolant hoses that are designed to take a higher range of heat and coolant pressures than OEM style hoses. Silicone has a much higher strength than the OEM rubber hoses which will prevent the hoses from expanding. ** ** Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; ... |
|
Fits all 2022+ Honda Civic 1.5T Fits all 2023+ Acura Integra 1.5T Fits all variant models including Si, CVT, 6MT, RHD, International Models, ... |
ETS 2022+ Subaru WRX Front Mount Intercooler Piping Kit Only The ETS intercooler piping kit uses 2.5" OD 304 Stainless Steel tubing. The piping is 1 piece mandrel bent with no welds or joints to disrupt flow. The ends of the pipes are beaded so you won't have to worry about couplers coming off during a pull. We finish our pipes in a wrinkle black powder coat. We guarantee the best possible ... |
Fits all 2021+ Acura TLX 2.0T Fits all 2021+ Acura RDX 2.0T (Most 2019-2020 Models do not require this kit) Fits all variant models including CVT,10AT, 6MT, RHD, International Models, Etc. Overview INTERCOOLER INSTALL GUIDE Important Notes: - NO ECU CALIBRATION REQUIRED - THIS REQUIRES ... |
Fits all 2021 Acura TLX Type-S 3.0T Fits all variant models including RHD, International Models, Etc. Overview INSTALL GUIDE Important Notes: NO ECU CALIBRATION REQUIRED Compatible with Factory Intercooler outlet and PRL Motorsports Intercooler upgrade with 3" outlet. Technical Notes: Our charge pipe upgrade kit utilizes a ... |
|
|
The COBB Tuning Front Mount Intercooler Hot Pipes are available to connect the turbocharger compressor to the passenger side of the COBB Tuning FMIC Core. These pipes have been fabricated from high-grade aluminum materials and feature smooth mandrel bends that are combined with 2.5" piping to limit turbulence under boost. These pipes will also come protected in a nice black powder-coated finish ... |
The COBB Tuning Front Mount Intercooler Cold Side Pipes are available for separate purchase for those of you who may have purchased one of the COBB Tuning Front Mount Intercooler Cores. These pipes have been designed to connect to the throttle body to the driver's side end tank. These are 2.5" pipes that have been made of aluminum and feature smooth bends to reduce the amount of air turbulence ... |
|
|
|
|
|
Directly replace your Supra's restrictive plastic intercooler tube with aFe's BladeRunner free-flowing, heat-resistant aluminum tube. - Outflows Factory Tube by up to 40% - Constructed from TIG-Welded 2-1/2" to 3" Aluminum Tubing - 1/8" NPT Port for Sensor Connection or Water Methanol Injection - Powder Coated Wrinkle Black for Heat and Corrosion Resistance - Factory-Style Quick Connect with ... |
Special Fitment Note: Supported fitments include only those vehicles running OEM STI and GrimmSpeed Top Mount Intercoolers. The elbow coupler is sized to fit multiple turbo setups, some trimming may be required. Is your old 90 degree TMIC coupler all chewed up from years of use? Is it dirty and oil-covered? Looking to just add a bit of color to your engine bay? We have the solution! Quick ... |
EMISSIONS This part is legal under the provisions of EPA's Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA's Anti-Tampering Policy. NOT ... |
EMISSIONS This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy. NOT ... |
EMISSIONS This part is legal under the provisions of EPA's Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA's Anti-Tampering Policy. NOT ... |
Improve the air flow in your vehicle with the PERRIN Charge Pipe. The OEM charge pipe for your application is restrictive and the design narrows down in certain areas which creates uneven airflow. The PERRIN design combines smooth bends with a smooth interior with a larger piping diameter that creates better intercooler efficiency. This charge pipe will come with all the necessary connectors to ... |
|
|
|
Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. Perfect Fit: This tube kit includes high quality stainless-steel, spring loaded T-bolt clamps and heavy-duty 5-ply polyester reinforced silicone couplings. A factory-style billet aluminum quick-connect adapter with an O-ring seal ensures ... |
|
Torque Solution Silicone Intercooler Boost Hose Set is a must have for your Type-R. They have been designed for optimal flow using high quality 4 layer silicone. They withstand higher boost pressures and heat over the OEM hoses. We also include (4) Black Anodized CNC Billet Aluminum Couplings for a perfect fit and finish. * Eliminates the failure prone rubber hose * (4) 4 Layer Silicone ... |
| |
|
|
|
|
The GrimmSpeed Charge Pipe kit replaces the restrictive plastic stock unit on the FA20 powered WRX with larger diameter CNC mandrel bent aluminum tubing and custom formed silicone. The increased diameter 2.5in tubing and large radius bends decrease restriction for the charge air, which results in increased performance and decreased time to spool. Beautiful texture black powdercoat, a ... |
|